ESB chewbacca *Cleared*

[tenebris]

That's really nice!

How you getting on with the mesh and the suit?

[ATAUK]

That's really nice!

How you getting on with the mesh and the suit?

Thank you

Love the work jamie done on the head . Just hope i can do it justice with the bidy etc .

Have some high steppers now along with s2 leg band kit so can mod them to have twin side supports .
Once i add the ali supports . Will get on the high steppers and get some pics so can be guided on the under suit for where body / arms etc should hang.
Undersuut once i know how it should fit . Seamstress said one day it be done .

Prob be after mcm london now though but be good to get started :)

Mesh is sorted . Did post a link i think . Its great stuff too



Sent from my SM-G960F using Tapatalk

[ATAUK]

So decided to start modding the high steppers .
Worse case scenario back to the wooden platforms and use the same supports .


Added a nut to the out sides to pull the support out a little more

Supports are 19.5 mm square by 2mm aluminium

These high steppers take me to 7 feet 4.5 / 7 feet 5 inches

Was initially thinking remore 3 inch from bottom of base . Slide back over the top and reattach with bolts and rivets .
Will the extra couple of inch make much difference when walking ?

Also in pics ive drawn a line where possibly to move the supports forward a little

2 small vids
First time on any for of stilt with supports .
Only flat area the hallway lol

https://youtu.be/7JJIyimxV5E
https://youtu.be/DdwdRji58mA

First wookiee steps feel like a elephant dancing on ice

Any advice and help apreciated


Sent from my SM-G960F using Tapatalk

[Larphitupfuzzball]

So decided to start modding the high steppers .
Worse case scenario back to the wooden platforms and use the same supports .


Added a nut to the out sides to pull the support out a little more

Supports are 19.5 mm square by 2mm aluminium

These high steppers take me to 7 feet 4.5 / 7 feet 5 inches

Was initially thinking remore 3 inch from bottom of base . Slide back over the top and reattach with bolts and rivets .
Will the extra couple of inch make much difference when walking ?

Also in pics ive drawn a line where possibly to move the supports forward a little

2 small vids
First time on any for of stilt with supports .
Only flat area the hallway lol

https://youtu.be/7JJIyimxV5E
https://youtu.be/DdwdRji58mA

First wookiee steps feel like a elephant dancing on ice

Any advice and help apreciated


Sent from my SM-G960F using Tapatalk

Looking good. Legs look a bit stiff in parts so might be worth trying the post a bit further forward and see how it goes. You just need to be comfortable in them and that will give you confidence mate. I’m looking to do the Kiltwalk with Chewie in September as it’s only 5 miles.

[ATAUK]

So decided to start modding the high steppers .
Worse case scenario back to the wooden platforms and use the same supports .


Added a nut to the out sides to pull the support out a little more

Supports are 19.5 mm square by 2mm aluminium

These high steppers take me to 7 feet 4.5 / 7 feet 5 inches

Was initially thinking remore 3 inch from bottom of base . Slide back over the top and reattach with bolts and rivets .
Will the extra couple of inch make much difference when walking ?

Also in pics ive drawn a line where possibly to move the supports forward a little

2 small vids
First time on any for of stilt with supports .
Only flat area the hallway lol

https://youtu.be/7JJIyimxV5E
https://youtu.be/DdwdRji58mA

First wookiee steps feel like a elephant dancing on ice

Any advice and help apreciated


Sent from my SM-G960F using Tapatalk

Looking good. Legs look a bit stiff in parts so might be worth trying the post a bit further forward and see how it goes. You just need to be comfortable in them and that will give you confidence mate. I’m looking to do the Kiltwalk with Chewie in September as it’s only 5 miles.

Cheers mate ive moved more forward
Legs bent a little just been fighting on with adjusting laces at rear lol

You must be comfortable in yours to walk that distance
Nice one mate

Sent from my SM-G960F using Tapatalk

[Jerrick Sunrunner]

Now ya rocking!

[ATAUK]

Supports moved forward ..
May adjust leg bands a little lower as just on bottom of knee. Laces arnt directs behind knee unless band covers knee

No foam / rubber on base yet either

may still remove a couple of inch just hope if i do it will help

Outside on uneven path

https://youtu.be/61aLLZWa3cs

Hall

https://youtu.be/PgdHq-n44Ww

Sent from my SM-G960F using Tapatalk

[ATAUK]

Modded again this time taking the supports back very slightly

Along with another small vid

https://youtu.be/o41obcVDm48


May take 2 inch off bottom tomorrow . Put cut off part back over to base and bolt and rivet in place

Sent from my SM-G960F using Tapatalk

[ATAUK]

Well today my head arrived from Jamie in the US ..
Beautiful work .
He aint in too bad shape after his long journey :)

Find best place for padding etc

Now to find a stand to keep it on that wont fall over

Now just gotta work out how im gonna add foam to base of high steppers while keeping the weight down and can get the mesh suit made up :)

Sent from my SM-G960F using Tapatalk

[Larphitupfuzzball]

Lovely mask from Jamie. As for a stand for it. Some people fit a head bust stand to an upturned bucket

[ATAUK]

Lovely mask from Jamie. As for a stand for it. Some people fit a head bust stand to an upturned bucket

Thanks mate .
Yep i love the mask its truly a work of art .

Had a manenequin body in the shed .( just torso ) on a stand . Removed base plate and pole . Used a bump cap on the top and now i have a great stand :) well it works :) and it wont fall over .

Sent from my SM-G960F using Tapatalk

[Jerrick Sunrunner]

Dude the mask looks great!

[ATAUK]

Thank you .
Realy happy with it

Just been messing around with the high steppers
Brought the out sides in quite a bit on the outside so taper up maore .
Undersuit finally being made up on monday and can get some progress :)

Sent from my SM-G960F using Tapatalk

[ATAUK]

Dude the mask looks great!

Thank you

Sent from my SM-G960F using Tapatalk

[ATAUK]

Finally undersuit being done monday

Itching to start :)

Gotta work out how to pad out the mask as at moment cant see a think when walking ...still better than tk lol

Sent from my SM-G960F using Tapatalk