AOTC Tusken Raider WIP

Start your Alien WIPs here

Moderator: DCO

User avatar
tenebris
Base Membership Officer, Detachment CO
Posts: 882
Joined: Wed Jan 03, 2018 1:34 pm
Name: empathy gray
2019 Troops: 1
Total Troops: 6
501st Number: 70969
MMCC Name:: Tenebris

Re: AOTC Tusken Raider WIP

Post by tenebris » Sun Oct 06, 2019 9:02 am

Just to let you know I've seen this (but today is my respite day)I'll have a look at the refs and tutorial later. from a quick look it looks like there's no band on the cross over and a mandarin collar....But I think you are on the right track.

User avatar
SirCalcium
Posts: 151
Joined: Wed Jan 03, 2018 11:47 am
Name: Calum Macqueen
Location: Kilmarnock
2019 Troops: 24
Total Troops: 48
MMCC Name:: `Cal Starkno

Re: AOTC Tusken Raider WIP

Post by SirCalcium » Sun Oct 06, 2019 10:14 am

Amendments, on the tutorial there is a gap cut out in the middle that's 25 x 4 inches, that where the lower half will attach to the torso half

Image

when worn with a sash or belt the sleeves bunch up making it look more like the tusken robes

Image

For the taper, I'm thinking I'll start at the 24 inches, but narrow down to 20 inches close to the gap

Red Line
Image

As for the opening, I've redrawn the line where I personally think that should go
Outside Red Line
Image
But you must accept your regret the way you accept your mistakes. Then move on.

User avatar
SirCalcium
Posts: 151
Joined: Wed Jan 03, 2018 11:47 am
Name: Calum Macqueen
Location: Kilmarnock
2019 Troops: 24
Total Troops: 48
MMCC Name:: `Cal Starkno

Re: AOTC Tusken Raider WIP

Post by SirCalcium » Sun Oct 06, 2019 10:36 am

Quick update, I tapered the sleeves, and I think it looks better with

Image

And I added the mask and arms onto this mock up for reference

Image

Image
But you must accept your regret the way you accept your mistakes. Then move on.

User avatar
SirCalcium
Posts: 151
Joined: Wed Jan 03, 2018 11:47 am
Name: Calum Macqueen
Location: Kilmarnock
2019 Troops: 24
Total Troops: 48
MMCC Name:: `Cal Starkno

Re: AOTC Tusken Raider WIP

Post by SirCalcium » Wed Oct 09, 2019 8:27 pm

The sleeves were bothering me as I felt the cuffs were too wide, browsing on the main RL forum and saw mention that the sleeves taper towards the waist, so I've done test, I wrapped a scrap bit of fabric around my waist for reference.

Image

Right arm, altered. Left arm, Unaltered
But you must accept your regret the way you accept your mistakes. Then move on.

User avatar
SirCalcium
Posts: 151
Joined: Wed Jan 03, 2018 11:47 am
Name: Calum Macqueen
Location: Kilmarnock
2019 Troops: 24
Total Troops: 48
MMCC Name:: `Cal Starkno

Re: AOTC Tusken Raider WIP

Post by SirCalcium » Sat Oct 12, 2019 10:36 am

Began work on my Gaffi Stick, using the Gunstock design. Legion Judge on the main forum said PT Tuskens are allowed to use them.

The mace head was 3D printed by Richard Tonge aka Gunnerbill
IMG_20191011_114916.jpg
IMG_20191012_103911.jpg
IMG_20191012_105402.jpg
IMG_20191012_110537.jpg
IMG_20191012_112427.jpg
Sent from my ONEPLUS A6013 using Tapatalk

You do not have the required permissions to view the files attached to this post.
But you must accept your regret the way you accept your mistakes. Then move on.

Post Reply

Return to “Aliens Work in Progress”